Danieli to supply technological equipment for 2 Mtpy complex at Hoa Phat, Vietnam

Quang Ngai plant will produce rebars and wirerod for construction

Hoa Phat Group selected Danieli as technological supplier to complete the Quang Ngai Steel Complex Phase 1 Project located at the Dung Quat Economic Zone, in Quang Ngai province.

Danieli will supply three continuous casters and two rolling mills for construction-grade steel.

The three 6-strand conticasters, which will produce billets in a range of 130 to 165 mm, will be equipped with Fast Cast Cube® mould and Hy-Power® oscillation drive system that will guarantee the best performances and the lowest operational costs.

The rolling mills are characterized by a high production capacity even when producing small diameters of bars and wire rod.

Rolling Mill #1 will produce deformed bars from 10 to 25 mm at 28 m/s, with small sizes on 2-strand rolling mill through the HTC-High-speed Twin Channel system, and wire rod from 5.5 to 16 mm at 105 m/s.

Rolling Mill #2 will produce deformed bars from 10 to 40 mm at 44 m/s, with small sizes on 2-strand rolling mill through the HTC-High-speed Twin Channel system, reaching a production capacity of 235 tph.

Both rolling mills will be directly connected to the conticasters in order to operate in hot charging mode.

The high-speed bar mill #2 is fitted with 16 housingless stands plus two, 4-pass high-speed twist-free finishing blocks and a QTB process for high-tensile deformed bars.

Rolling Mill # 1 will have the same characteristics as Rolling Mill # 2, with the addition of a 6-pass fast-finishing modular block; a QTR process for high-tensile deformed wire rod; a loop-laying head with a controlled-cooling conveyor for wire rod production; a collecting pit, and a vertical trestle transporting system for wire-rod coils weighing up to 3 tons.

Danieli Automation will deliver the complete electrical and automation systems featuring user-friendly interfaces.
The Danieli Automation Q-HEAT on-line induction heating system will enable efficient, uniform and flexible temperature control of the billets.

Plant startup is scheduled within 26 months.

Once completed, the Quang Ngai project will raise to six the total number of rolling mill plants supplied by Danieli to Hoa Phat Group since 2000.

source: danieli