Danieli

Tags - Danieli
Tung Ho Steel Vietnam again chose Danieli to upgrade its 600,000-tpy flexible rolling mill in Phu My. Coming four months after the FAC for the new bar and light-section rolling mill, this order consists of an in-line water quenching system for 10- to 43-mm straight rebars.
News ID: 5815    Publish Date : 2019/08/07

Danieli and Hoa Phat Steel Sheet successfully produced the first coil from Hot Dip Galvanizing Line #2 at the Pho Noi A facility.
News ID: 5569    Publish Date : 2019/07/29

Earlier this week, the vessel shell for the new hot-blast stove #47 for blast furnace #4 at SSAB Oxelösund, Sweden, was erected. The entire vessel shell was fully prefabricated in an off-site workshop and erected in its operating position in a single lift.
News ID: 5494    Publish Date : 2019/07/27

The largest extrusion press installed for Metra at Rodengo Saiano, Italy, will be revamped by Danieli Breda. Supplied by DB as a 55-MN short-stroke press, the line will be updated to operate with greater force at 75 MN, processing billets up to 2,100 mm long.
News ID: 5319    Publish Date : 2019/07/20

Baotou Steel Group Co. Ltd. in China selected Danieli to modernize its 600,000-tpy wirerod mill. The key equipment to be supplied will be a new, four-pass TMB high-speed finishing block to produce smooth-wire from 4.5 to 26 mm diameter, and rebar-wire from 6 to 16 mm diameter at a maximum speed of 110 mps.
News ID: 5318    Publish Date : 2019/07/20

The new plant for the production of 1 Mtpy hot rolled coils will be installed within the existing site in Bekabad.
News ID: 5064    Publish Date : 2019/07/08

Luzhou Xinyang Iron and Steel selected Danieli Zero-bucket EAF technology for two new electric arc furnaces to be installed in the new meltshop in Luzhou City, Sichuan Province, China.
News ID: 5063    Publish Date : 2019/06/29

Minyuan I&S Group in Shandong, China, ordered from Danieli a new mill for 12- to 40-mm rebar, produced at up to 240 tph from a 165-mm, 2,300-Kg billet.
News ID: 5062    Publish Date : 2019/06/26

In December 2014 Danieli Service executed a revamping with geometrical re-alignment of mill windows by means of on-site machining at a hot strip mill plant in Kazakhstan.
News ID: 5061    Publish Date : 2019/06/24

With a shutdown lasting just three weeks, the wirerod mill extension and addition of fans for coil treatment plus the installation of a second compactor to increase wirerod mill productivity, have been completed at ADV in Italy.
News ID: 5060    Publish Date : 2019/06/21

Corporacion Aceros Arequipa named Danieli to install two additional roughing mill stands as the second phase of the contract to upgrade the mill. This additional equipment will allow the increase of billet sizes to 160 mm square and improve product yield as well as mill utilization.
News ID: 5059    Publish Date : 2019/06/18

Danieli Service has successfully audited a training on assembly/disassembly procedures of oil-film bearing components, as well as inspection, failure analysis, predictive maintenance, fault-finding and evaluation of operating spares, aimed to increase the mill productivity by preventing any major oil-film bearing failure.
News ID: 5058    Publish Date : 2019/06/17

ECS scrap preheating and zero bucket: the most sustainable way to produce steel
News ID: 5057    Publish Date : 2019/06/12

Featuring Danieli Universal Endless technologies, it is the only plant in the world capable to produce HRC in coil-to-coil, semi-endless and endless mode
News ID: 5056    Publish Date : 2019/06/06

After the startup of the pickling, galvanizing, batch annealing lines and temper mill, Danieli and Yildiz Lar technical teams performed an impressive startup of the cold tandem mill which is part of the new complex in Izmit (Kocaeli).
News ID: 3488    Publish Date : 2019/01/29

On the 9th January 2019 Danieli and Shandong Rizhao successfully started up the relocated CC4 slab caster in the Rizhao plant, only 16 months after the contract coming into force.
News ID: 3485    Publish Date : 2019/01/29

The extremely fast start-up continues at Deacero Ramos rolling mill in Arizpe, Mexico.
News ID: 2712    Publish Date : 2018/11/26

The new cost-effective spare parts management solution through the Danieli on-demand warehouse system.
News ID: 2711    Publish Date : 2018/11/26

In order to extend the range of steel grades and increase production capacity, Nucor has contracted Danieli to upgrade its hot strip plant in Ghent, KY.
News ID: 2710    Publish Date : 2018/11/26

Following recent orders from Maanshan Iron & Steel for a new bloom caster and Huaigang Special Steel for a caster upgrade with the Q-SOFT technological package, another two Chinese top steel producers, Valin Xiangtan and Hengyang Valin Steel Tube, chose Danieli casting technology to improve their steelmaking plants.
News ID: 2661    Publish Date : 2018/11/19

Most Like